HP LaserJet 1020 Plus setup - Add a network printer to Windows

HP LaserJet 1020 Plus setup - Add a network printer to Windows

Set up a Wi-Fi or wired network printer in Windows without installing any additional drivers.

Procedure

  1. Search Windows for and open Change device installation settings, and then make sure Yes (recommended) is selected.

  2. Place the printer and the computer near the Wi-Fi router.

  3. Connect the printer to the same network that your computer is connected to.

    • Wi-Fi connection for printers with a touchscreen control panel: Open the Setup, Network, or Wireless settings menu, select Wireless Setup Wizard, and then follow the instructions to select the network name and enter the password.

    • Wi-Fi connection for most printers without a touchscreen control panel: Press and hold the Wireless button  for five seconds or until the wireless light starts to flash. Within two minutes, press and hold the WPS (Wi-Fi Protected Setup) button on the router until the connection process begins. The printer wireless light stops flashing when the connection completes.

    • Wi-Fi connection for HP Deskjet 6000 and 6400, ENVY 6000 and 6400, and Tango printers: Press and hold the Wi-Fi button  and the Power button on the back of the printer for five seconds until the blue bar flashes. Within two minutes, press and hold the WPS button on the router until the connection process begins. The blue bar stops flashing when the connection completes.

    • Wired (Ethernet) network connection: Connect the network cable to the printer Ethernet port  and to an available port on the router or access point. At the printer port, the green light should be steady and the orange activity light should blink.

  4. In Windows, search for and open Add a printer or scanner.

  5. Click Add a printer or scanner, and then wait for Windows to locate available printers.

    • If your printer is found, click it, and then click Add device to complete the driver installation.

    • If your printer is not found, continue with these steps.

  6. Click The printer that I want isn't listed.

  7. In the Find a printer by other options window, select Add a printer using TCP/IP address or hostname, and then click Next.

  8. Select Autodetect from the Device type drop-down.

  9. Find your printer IP address.

    • HP Smart app: From the app home screen, click the image of your printer, and then click Network Information to find the IP address.

    • Printers with a touchscreen control panel: On the control panel, open the Wireless Summary or Network Settings menu to find the IP address.

    • Printers without a touchscreen control panel: On the control panel, press the Information button  to print an Information Report, and then find the IP address on the printout. Printing reports from the control panel can vary by printer model.

  10. Type the printer IP address, click Next, and then follow the instructions to install the driver for your printer model.

Komentar

Posting Komentar